Spacecrafts for Celestia
-
Topic authortoutatis - Posts: 666
- Joined: 24.02.2018
- Age: 51
- With us: 2 years 7 months
- Location: Almaty, Kazakhstan
Today in morning I combined the models of Mars Express, Beagle 2, and MARSIS Radar through SSC-file... Now you can observe Mars Express with these objects in the right time spans...
Just unzip the file below to Mars Expres folder... Works only with Mars Express add-on I made...
Just unzip the file below to Mars Expres folder... Works only with Mars Express add-on I made...
- Attachments
-
Mars Express (Models and SSC-file).7z- (1.19 MiB) Downloaded 65 times
-
-
-
-
Topic authortoutatis
- Posts: 666
- Joined: 24.02.2018
- Age: 51
- With us: 2 years 7 months
- Location: Almaty, Kazakhstan
* Pioneer Venus Orbiter * add-on by toutatis... was made changes in the SSC-file... and small correction for model too... solar panels reflect the light better now...
Added after 7 minutes 47 seconds:
I also will revise OSIRIS-REx and Hayabusa-2 add-ons... some elements of the spacecrafts changes during mission, so need to change the SSC-files and I will add some components for models...
Added after 6 minutes 35 seconds:
I think I will create my own website soon, where you all can watch and download things I made... Time will show...
Added after 7 minutes 47 seconds:
I also will revise OSIRIS-REx and Hayabusa-2 add-ons... some elements of the spacecrafts changes during mission, so need to change the SSC-files and I will add some components for models...
Added after 6 minutes 35 seconds:
I think I will create my own website soon, where you all can watch and download things I made... Time will show...
- Attachments
-
- Pioneer Venus Orbiter (USA NASA).7z
- (3.68 MiB) Downloaded 66 times
-
-
-
-
-
Topic authortoutatis
- Posts: 666
- Joined: 24.02.2018
- Age: 51
- With us: 2 years 7 months
- Location: Almaty, Kazakhstan
* Stardust-NExT * add-on by toutatis... a big changes in SSC-file... the model was a bit modernized... there is no clones of the spacecraft now...
- Attachments
-
- Stardust-NExT (USA NASA)_Finale version.7z
- (2.51 MiB) Downloaded 65 times
-
-
-
-
-
Topic authortoutatis
- Posts: 666
- Joined: 24.02.2018
- Age: 51
- With us: 2 years 7 months
- Location: Almaty, Kazakhstan
............
- Attachments
-
- Galileo (USA JPL NASA).7z
- (19.1 MiB) Downloaded 57 times
-
-
-
-
- The probe very slowly leaves Galileo spacecraft...
-
Gurren Lagann
- Posts: 281
- Joined: 31.01.2018
- Age: 14
- With us: 2 years 8 months
- Location: State of Rio de Janeiro, Brazil
Toutatis and Gironde are literally improving every addon they make, and I applaud then for that!
"The tomorrow we're trying to reach is not a tomorrow you had decided on!"
- Simon the Digger
"Nothing is impossible for me, as long I'm determinated to keep moving forward!"
"If other people aren't going to do it, I'm going to do it myself!"
- Me (Gurren)
Current major projects:
- Aur Cir
- Cel+
- Project Sisyphus
- Populating the Local Group
- An galaxy generator
- Simon the Digger
"Nothing is impossible for me, as long I'm determinated to keep moving forward!"
"If other people aren't going to do it, I'm going to do it myself!"
- Me (Gurren)
Current major projects:
- Aur Cir
- Cel+
- Project Sisyphus
- Populating the Local Group
- An galaxy generator
-
Topic authortoutatis
- Posts: 666
- Joined: 24.02.2018
- Age: 51
- With us: 2 years 7 months
- Location: Almaty, Kazakhstan
Toutatis and Gironde are literally improving every addon they make, and I applaud then for that!
Thanks, Gurren Lagann...
Prepared a new modernized Hayabusa 2 model with a separating and moving elements such as landers, sample-return capsule and the sampler horn... but too bad, there is no data for creating trajectory...
Now I will modernize an OSIRIS-REx model in such way...
-
Topic authortoutatis
- Posts: 666
- Joined: 24.02.2018
- Age: 51
- With us: 2 years 7 months
- Location: Almaty, Kazakhstan
just modernized Galileo Probe model... you can make choice...
- Attachments
-
- Galileo Probe(model).7z
- (48.7 KiB) Downloaded 53 times
-
- real...
-
-
gironde
- Posts: 464
- Joined: 16.12.2016
- Age: 68
- With us: 3 years 10 months
- Location: Montigny-Les-Metz, Grand Est, Lorraine, Moselle, France
thanks, Gurren Lagann …
I'm not doing a new model right now and Toutatis is doing a lot better than me.
Toutatis
But Hayabusa 2 is still around Ryugu !
Why not do Hayabusa 1 while waiting ?
I'm not doing a new model right now and Toutatis is doing a lot better than me.
Toutatis
Prepared a new modernized Hayabusa 2 model with a separating and moving elements such as landers, sample-return capsule and the sampler horn... but too bad, there is no data for creating trajectory...
But Hayabusa 2 is still around Ryugu !
Why not do Hayabusa 1 while waiting ?
-
Topic authortoutatis
- Posts: 666
- Joined: 24.02.2018
- Age: 51
- With us: 2 years 7 months
- Location: Almaty, Kazakhstan
Why not do Hayabusa 1 while waiting ?
with time Gironde... and there is only final stage at HORIZONS...
but see in pic below that I found this today in night at HORIZONS for Hayabusa 2... and that is great...
I think that Mr. Jon.D.Giorgini visit our forum sometimes....
So I will start to create a new Hayabusa 2 add-on today...
- Attachments
-
-
Art Blos
- Moderator
- Posts: 827
- Joined: 31.08.2017
- Age: 28
- With us: 3 years 1 month
- Location: Volgodonsk, Rostov Oblast, Russia
What? Data for Hayabusa 2 has long been there. Otherwise, how could I build a trajectory for the Origin?toutatis wrote:but see in pic below that I found this today in night at HORIZONS for Hayabusa 2... and that is great...
I think that Mr. Jon.D.Giorgini visit our forum sometimes....
However, there is another problem. When Hayabusa-2 is located near Ryugu, it is necessary to build a trajectory relative to the asteroid. I personally found out from Giorgini. He said this option is not available (apparently the Japanese have not yet shared).
Founder and head of the project "Celestia Origin"