Spacecrafts for Celestia

The home for finished/released addons.
Avatar
SpaceFanatic64
Posts: 383
Joined: 16.08.2018
Age: 13
With us: 1 year
Location: Southern California

Post #1141by SpaceFanatic64 » 21.07.2019, 02:52

That's perfectly fine. I understand that life can get us away from hobbies or other activities.
Follower of the "Celestia Origin" project
Graphics Card: ATI Radeon 3000 Graphics

Avatar
Topic author
toutatis
Posts: 571
Joined: 24.02.2018
Age: 50
With us: 1 year 6 months
Location: Almaty, Kazakhstan

Post #1142by toutatis » 28.07.2019, 01:38

Work is continue.... yesterday I made XYZV-trajectory for Pioneer Venus Orbiter...
Attachments
Screenshot_2019-06-12-10-42-21.png
capture-20190728-072824.jpg
capture-20190728-072458.jpg
capture-20190728-071949.jpg
capture-20190728-071657.jpg

Avatar
Topic author
toutatis
Posts: 571
Joined: 24.02.2018
Age: 50
With us: 1 year 6 months
Location: Almaty, Kazakhstan

Post #1143by toutatis » 28.07.2019, 01:55

These documents from the NASA archive helped me...
Attachments
capture-20190728-074907.jpg

Avatar
Topic author
toutatis
Posts: 571
Joined: 24.02.2018
Age: 50
With us: 1 year 6 months
Location: Almaty, Kazakhstan

Post #1144by toutatis » 29.07.2019, 02:18

orbital xyz-trajectory for Pioneer Venus Orbiter around Venus was completed from the date of its insertion in the orbit December 4 till July 4/ 1979 12:00:00 UTC... after this date till end of mission I will use the orbital elements where Pericenter is about 176 km from the planet, Apocenter is about 66 638 km... Inclination is 105,0 degrees... Eccentricity is 0,8422... and other elements for the epoch JD 2444059,00197...
Attachments
capture-20190729-081153.jpg

Avatar
Topic author
toutatis
Posts: 571
Joined: 24.02.2018
Age: 50
With us: 1 year 6 months
Location: Almaty, Kazakhstan

Post #1145by toutatis » 30.07.2019, 19:08

the trajectory for Pioneer Venus Orbiter ( from start till end of mission) is ready... the model will be ready during week...
Attachments
capture-20190731-005746.jpg

Avatar
Topic author
toutatis
Posts: 571
Joined: 24.02.2018
Age: 50
With us: 1 year 6 months
Location: Almaty, Kazakhstan

Post #1146by toutatis » 01.08.2019, 07:33

Pioneer Venus Orbiter... the model and add-on... the presentation on Sunday, August 4...
Attachments
capture-20190801-131950.jpg
capture-20190801-131705.jpg
capture-20190801-131428.jpg
capture-20190801-131154.jpg
capture-20190801-130803.jpg

Avatar
gironde M
Posts: 386
Joined: 16.12.2016
Age: 66
With us: 2 years 8 months
Location: Montigny-Les-Metz, Grand Est, Lorraine, Moselle, France

Post #1147by gironde » 01.08.2019, 09:21

We all want to be Sunday already !

:smile:

Avatar
Topic author
toutatis
Posts: 571
Joined: 24.02.2018
Age: 50
With us: 1 year 6 months
Location: Almaty, Kazakhstan

Post #1148by toutatis » 01.08.2019, 22:33

We all want to be Sunday already !

:smile: :smile: :smile: assigning materials and texturing, that is work I need to do only...
Attachments
capture-20190802-043424.jpg

Avatar
SpaceFanatic64
Posts: 383
Joined: 16.08.2018
Age: 13
With us: 1 year
Location: Southern California

Post #1149by SpaceFanatic64 » 01.08.2019, 23:12

Very nice! I wonder if Hipparcos is over the horizon as well soon!
Follower of the "Celestia Origin" project
Graphics Card: ATI Radeon 3000 Graphics

Avatar
Topic author
toutatis
Posts: 571
Joined: 24.02.2018
Age: 50
With us: 1 year 6 months
Location: Almaty, Kazakhstan

Post #1150by toutatis » 02.08.2019, 02:18

I wonder if Hipparcos is over the horizon as well soon!
for making model from the zero need a lot of pictures of spacecraft... time... and trajectory for add-on! :smile: :smile: :smile:

but okay... I can make any trajectories... and I can make models of spacecrafts... a lot of pictures I can find in internet but I will be very grateful if the members of Celestia forum will help me in this...

Avatar
SpaceFanatic64
Posts: 383
Joined: 16.08.2018
Age: 13
With us: 1 year
Location: Southern California

Post #1151by SpaceFanatic64 » 02.08.2019, 03:03

I'll be more than glad to help you with Hipparcos in any way possible. :smile:
Follower of the "Celestia Origin" project
Graphics Card: ATI Radeon 3000 Graphics

Avatar
Topic author
toutatis
Posts: 571
Joined: 24.02.2018
Age: 50
With us: 1 year 6 months
Location: Almaty, Kazakhstan

Post #1152by toutatis » 02.08.2019, 14:52

I'll be more than glad to help you with Hipparcos in any way possible. :smile:

Thanks SpaceFanatic64... :smile: I will start project Hipparcos after I finish with Luna 2 and Luna 3... the models of these spacecrafts are ready at 99%... need a trajectories for add-ons... can you imagine, Luna 2 should to impact near the place at Moon as it was in reality... I will accept an error not more than 50 km only... :think:
With trajectory for Luna 3 no a big problems...

Avatar
Topic author
toutatis
Posts: 571
Joined: 24.02.2018
Age: 50
With us: 1 year 6 months
Location: Almaty, Kazakhstan

Post #1153by toutatis » 03.08.2019, 18:14

................
Attachments
capture-20190803-235840.jpg
capture-20190804-000450.jpg

Avatar
Topic author
toutatis
Posts: 571
Joined: 24.02.2018
Age: 50
With us: 1 year 6 months
Location: Almaty, Kazakhstan

Post #1154by toutatis » 03.08.2019, 21:50

Alexey Nesterov (toutatis) presents a new model and add-on for Celestia... *** Pioneer Venus Orbiter ***
Attachments
Pioneer Venus Orbiter.7z
(3.68 MiB) Downloaded 25 times
capture-20190804-031611.jpg
capture-20190804-031116.jpg
capture-20190804-033035.jpg

Avatar
SpaceFanatic64
Posts: 383
Joined: 16.08.2018
Age: 13
With us: 1 year
Location: Southern California

Post #1155by SpaceFanatic64 » 03.08.2019, 22:24

I thank you for taking my request. In fact, I'll probably never get rid of this addon! Pioneer Venus Multiprobe, with detaching probes, coming soon! :smile:
Follower of the "Celestia Origin" project
Graphics Card: ATI Radeon 3000 Graphics

Avatar
Topic author
toutatis
Posts: 571
Joined: 24.02.2018
Age: 50
With us: 1 year 6 months
Location: Almaty, Kazakhstan

Post #1156by toutatis » 04.08.2019, 01:35

Yes, your request SpaceFanatic64... :smile: :smile: :smile:
watch how changes the orbital frame reference on December 4, when this spacecraft was in the process of entering into orbit around Venus... I like this model and add-on... I have learned a lot of new things in modeling and in making trajectories... :biggrin:

Avatar
SpaceFanatic64
Posts: 383
Joined: 16.08.2018
Age: 13
With us: 1 year
Location: Southern California

Post #1157by SpaceFanatic64 » 04.08.2019, 03:08

It is so good, I have informed Art Blos if he can add this into Celestia Origin. But he has not responded yet.
Follower of the "Celestia Origin" project
Graphics Card: ATI Radeon 3000 Graphics

Avatar
gironde M
Posts: 386
Joined: 16.12.2016
Age: 66
With us: 2 years 8 months
Location: Montigny-Les-Metz, Grand Est, Lorraine, Moselle, France

Post #1158by gironde » 04.08.2019, 09:54

Beautiful achievement!
The progress of the mission is remarkably described even if I do not master BodyFrame and Timeline which are poorly explained in the wikipedia pages for Celestia. This deserves a lesson on the subject.

:clap: :clap: :clap:

Added after 2 hours 1 minute:
Toutatis say
Fobos-Grunt... Job done!
post : viewtopic.php?p=142616#p142616

You have never published the result. :sad:

Avatar
Art Blos M
Moderator
Posts: 598
Joined: 31.08.2017
Age: 27
With us: 2 years
Location: Volgodonsk, Rostov Oblast, Russia

Post #1159by Art Blos » 05.08.2019, 05:35

gironde wrote:You have never published the result.
Fobos-Grunt was done at my personal request. Here is an improved version that will be included in the next release CO.
Attachments
Fobos-Grunt.7z
(4.23 MiB) Downloaded 25 times
Founder and head of the project "Celestia Origin"

Avatar
Topic author
toutatis
Posts: 571
Joined: 24.02.2018
Age: 50
With us: 1 year 6 months
Location: Almaty, Kazakhstan

Post #1160by toutatis » 05.08.2019, 06:12

Beautiful achievement!
The progress of the mission is remarkably described even if I do not master BodyFrame and Timeline which are poorly explained in the wikipedia pages for Celestia. This deserves a lesson on the subject.

Thank you Gironde! :smile: :smile: :smile:


Return to “Add-on releases”

Who is online

Users browsing this forum: 28 guests
Bots: Bing [Bot]