Spacecrafts for Celestia

The home for finished/released addons.
Avatar
Topic author
toutatis
Posts: 392
Joined: 24.02.2018
Age: 49
With us: 8 months 22 days
Location: Almaty, Kazakhstan

Post #841by toutatis » 16.10.2018, 11:39

.................

Added after 21 minutes 42 seconds:
Stardust add-on contains a 3 models... Stardust-a.. Stardust-b and Stardust-s (without capsule)
Attachments
Spacecraft add-ons (MD).7z
(30.78 MiB) Downloaded 24 times
capture-20181016-131022.jpg
capture-20181016-155832.jpg

Avatar
gironde M
Posts: 301
Joined: 16.12.2016
Age: 66
With us: 1 year 11 months
Location: Montigny-Les-Metz, Grand Est, Lorraine, Moselle, France

Post #842by gironde » 16.10.2018, 15:19

Toutatis,

All this looks very nice

:clap: :clap: :clap:

Avatar
Topic author
toutatis
Posts: 392
Joined: 24.02.2018
Age: 49
With us: 8 months 22 days
Location: Almaty, Kazakhstan

Post #843by toutatis » 16.10.2018, 18:58

Thanks Gironde

Avatar
Topic author
toutatis
Posts: 392
Joined: 24.02.2018
Age: 49
With us: 8 months 22 days
Location: Almaty, Kazakhstan

Post #844by toutatis » 16.10.2018, 22:45

Cassini...
Attachments
capture-20181017-043547.jpg

Avatar
SpaceFanatic64
Posts: 162
Joined: 16.08.2018
Age: 13
With us: 3 months 3 days
Location: Southern California

Post #845by SpaceFanatic64 » 16.10.2018, 23:51

Nice work with the Cassini model. I assuming your creating this rerelease because I noticed some parts that looked like they needed to be smoothed out.

Also with new, better looking textures. Woohoo! :smile:
Follower of the "Celestia Origin" project
Graphics Card: ATI Radeon 3000 Graphics

Avatar
Diigg M
Posts: 33
Joined: 09.02.2011
With us: 7 years 9 months

Post #846by Diigg » 17.10.2018, 08:18

Fantastic models!. Thank you :clap:

A doubt. I saw that your model of the probe "Wind" does not include the xyz data that published @gironde, although on the other hand, it extends until the year 2030.
Reason?

Want to see the new model of the Cassini probe. It looks very good!.
Currently I have installed the repack that made @Gironde. The new model is only for the Cassini probe or also for all phases of the mission?

Greetings and thank you for your effort and share it with us.

Avatar
Topic author
toutatis
Posts: 392
Joined: 24.02.2018
Age: 49
With us: 8 months 22 days
Location: Almaty, Kazakhstan

Post #847by toutatis » 17.10.2018, 12:25

The new model is only for the Cassini probe or also for all phases of the mission?
for all phases... 3 models...


Greetings and thank you for your effort and share it with us.
You are welcome Diigg...

but about WIND... I still think...

Avatar
Topic author
toutatis
Posts: 392
Joined: 24.02.2018
Age: 49
With us: 8 months 22 days
Location: Almaty, Kazakhstan

Post #848by toutatis » 17.10.2018, 12:28

Cassini-Huygens....
Attachments
Cassini-Huygens(models).7z
(1.64 MiB) Downloaded 13 times
capture-20181017-174837.jpg
capture-20181017-181414.jpg

Avatar
gironde M
Posts: 301
Joined: 16.12.2016
Age: 66
With us: 1 year 11 months
Location: Montigny-Les-Metz, Grand Est, Lorraine, Moselle, France

Post #849by gironde » 17.10.2018, 12:59

Diigg,
I put you back in download the WIND addon which includes the last model of Toutatis and my ssc file
xyz file: from 17-11-1994 to 13-12-2018
data LOCATOR mass center Earth
delay between 2 readings: 1 day

I added a Timeline for the post-file period xyz until 01-01-2030


:hi:

Added after 7 minutes 14 seconds:
screenshot

Added after 27 minutes 36 seconds:
Some views of BepiColombo.
Launch may be on 19-10-2018

I am waiting for the opinion of SpaceFanatica64 because it is he who discovered the 3D files.
Maybe he is preparing his addon!

orbite red : mass center Earth
orbite yellow : mass center Sun
the data of HORIZONS are the same, just the mass center is modified in the 2 extractions on the site.

2 ssc files: BepiColombo MCS (sun) and BepiColombo MCS (earth)
:smile:

Sans titre 1.jpg
Sans titre 2.jpg
Sans titre 3.jpg
Sans titre 4.jpg
Attachments
Sans titre 2.jpg
Wind around Earth (NASA).zip
(783.67 KiB) Downloaded 13 times

Avatar
Diigg M
Posts: 33
Joined: 09.02.2011
With us: 7 years 9 months

Post #850by Diigg » 17.10.2018, 13:37

Thanks @Gironde

Edited the repack of @gironde with the new models of @Toutatis. Wonderful!

Cassini.jpg
Last edited by Diigg on 17.10.2018, 14:07, edited 1 time in total.

Avatar
SpaceFanatic64
Posts: 162
Joined: 16.08.2018
Age: 13
With us: 3 months 3 days
Location: Southern California

Post #851by SpaceFanatic64 » 17.10.2018, 13:58

Diigg, in order for the Cassini addon to work, you must download the older one listed on the forum earlier. Then replace the textures and models with the new ones.
Follower of the "Celestia Origin" project
Graphics Card: ATI Radeon 3000 Graphics

Avatar
Topic author
toutatis
Posts: 392
Joined: 24.02.2018
Age: 49
With us: 8 months 22 days
Location: Almaty, Kazakhstan

Post #852by toutatis » 17.10.2018, 14:05

Thank you. @toutatis for Cassini model, but
No .ssc file, no data files?...
here....
Attachments
Cassini-Huygens.7z
(10.79 MiB) Downloaded 15 times

Avatar
SpaceFanatic64
Posts: 162
Joined: 16.08.2018
Age: 13
With us: 3 months 3 days
Location: Southern California

Post #853by SpaceFanatic64 » 18.10.2018, 01:20

Gironde, can you release the BepiColombo addon above? For my version, I'm going to use the orbit in yellow because it looks far less crazy than the red one.
Follower of the "Celestia Origin" project
Graphics Card: ATI Radeon 3000 Graphics

Avatar
gironde M
Posts: 301
Joined: 16.12.2016
Age: 66
With us: 1 year 11 months
Location: Montigny-Les-Metz, Grand Est, Lorraine, Moselle, France

Post #854by gironde » 18.10.2018, 06:55

Here is the addon on BepiColombo whose flight is precise.

3D files are extracted from the Cosmographia packs. I converted them to cmod. The data files come from HORIZONS with a step of 1 days. They are well on predictable coordinates and not real data because the machine is not gone yet.

There are 2 models ssc: 1 with the Earth as mass center and 1 other with Le Soleil as mass center. As the names of the spacecraft is different in each, you can use either one or the other or the 2.

The version (earth) draws a trajectory seen from the Earth as the passage of time. The positions in space are exactly the same in both cases. the orbit rotates like the Earth as time passes and finally the position of the satellite follows the trajectory with the Sun as a mass center. There are 2 different colors of orbit according to the version which makes it possible to follow them more easily.

But it is certain that the orbit (sun) will remain the orbit of reference.


For MPO and MMO, their elliptical orbit around Mercury is calculated based on the PericenterDistance predicted by mission scientists. The actual date of their final orbit will only be known in 7 years. The value of eccentricity is purely fictional.

The MTM carrier's orbit is not known and will not be known until MMO and MPO are released. So the BepiColombo mission is a business to follow.


:smile: :hi:

Added after 20 minutes 20 seconds:
launch: UTC 20/10/2018 1h45

live from 1h30 UTC on:
https://ariane5.cnes.fr/fr/lancement-bepicolombo


:hi:
Attachments
BepiColombo to Mercure (ESA-JAXA).zip
(12.57 MiB) Downloaded 19 times

Avatar
Topic author
toutatis
Posts: 392
Joined: 24.02.2018
Age: 49
With us: 8 months 22 days
Location: Almaty, Kazakhstan

Post #855by toutatis » 19.10.2018, 17:20

ICESat-2....
Attachments
ICESat-2.7z
(1.88 MiB) Downloaded 18 times
capture-20181019-230434.jpg

Avatar
Croc M
Forum Admin
Posts: 357
Joined: 10.08.2016
Age: 71
With us: 2 years 3 months
Location: Udomlya, Tver region, Russia

Post #856by Croc » 19.10.2018, 18:33

ICESat-2....

toutatis, Very high quality detailed satellite!

:clap: :clap: :clap: :smile: :smile: :smile:

ICESat-2.jpg

Avatar
SpaceFanatic64
Posts: 162
Joined: 16.08.2018
Age: 13
With us: 3 months 3 days
Location: Southern California

Post #857by SpaceFanatic64 » 19.10.2018, 21:48

Nice work, toutatis!
Follower of the "Celestia Origin" project
Graphics Card: ATI Radeon 3000 Graphics

Avatar
Topic author
toutatis
Posts: 392
Joined: 24.02.2018
Age: 49
With us: 8 months 22 days
Location: Almaty, Kazakhstan

Post #858by toutatis » 19.10.2018, 22:57

Thanks guys...

Avatar
SpaceFanatic64
Posts: 162
Joined: 16.08.2018
Age: 13
With us: 3 months 3 days
Location: Southern California

Post #859by SpaceFanatic64 » 19.10.2018, 23:35

If there are no delays, then BepiColombo should be launching tomorrow!
Follower of the "Celestia Origin" project
Graphics Card: ATI Radeon 3000 Graphics

bh
Posts: 1460
Joined: 17.12.2002
With us: 15 years 11 months
Location: Oxford, England

Post #860by bh » 20.10.2018, 06:40

toutatis wrote:ICESat-2....

Superb Toutatis... many thanks!
regards...bh.


Return to “Add-on releases”

Who is online

Users browsing this forum: 4 guests
Bots: Google [Bot]