Spacecrafts for Celestia

The home for finished/released addons.
Avatar
Topic author
toutatis
Posts: 483
Joined: 24.02.2018
Age: 50
With us: 1 year 3 months
Location: Almaty, Kazakhstan

Post #1061by toutatis » 26.04.2019, 19:56

Luna-1.... Moon flyby...
Attachments
capture-20190427-015155.jpg

Avatar
Topic author
toutatis
Posts: 483
Joined: 24.02.2018
Age: 50
With us: 1 year 3 months
Location: Almaty, Kazakhstan

Post #1062by toutatis » 27.04.2019, 08:58

Luna-1... by toutatis...

Added after 2 minutes 7 seconds:
............
Attachments
Luna-1.7z
(1.07 MiB) Downloaded 10 times
capture-20190427-092335.jpg
capture-20190427-093041.jpg
capture-20190427-092658.jpg
capture-20190427-093533.jpg
capture-20190427-093337.jpg
capture-20190427-144308.jpg
capture-20190427-144013.jpg

Avatar
Topic author
toutatis
Posts: 483
Joined: 24.02.2018
Age: 50
With us: 1 year 3 months
Location: Almaty, Kazakhstan

Post #1063by toutatis » 28.04.2019, 04:04

luna-1 model was a bit corrected... (Opening angle of antennas was increased...)
Attachments
Luna-1.7z
(1.07 MiB) Downloaded 16 times
capture-20190428-095714.jpg

Avatar
SpaceFanatic64
Posts: 295
Joined: 16.08.2018
Age: 13
With us: 9 months 9 days
Location: Southern California

Post #1064by SpaceFanatic64 » 28.04.2019, 06:54

Was the model made from scratch or was it an enhancement of a previously existing model?
Follower of the "Celestia Origin" project
Graphics Card: ATI Radeon 3000 Graphics

Avatar
Topic author
toutatis
Posts: 483
Joined: 24.02.2018
Age: 50
With us: 1 year 3 months
Location: Almaty, Kazakhstan

Post #1065by toutatis » 28.04.2019, 12:38

Was the model made from scratch or was it an enhancement of a previously existing model?

Base model from ORBITER... but about 70% elements of this model I changed and added some elements as well... and also prepared it for CELESTIA...

Avatar
Topic author
toutatis
Posts: 483
Joined: 24.02.2018
Age: 50
With us: 1 year 3 months
Location: Almaty, Kazakhstan

Post #1066by toutatis » 28.04.2019, 12:46

New GAIA model... Autor of the model: ESA (European Space Agency)... Prepared this model for Celestia: toutatis (Alexey Nesterov)...
Attachments
Gaia.7z
(7.55 MiB) Downloaded 15 times
capture-20190428-181555.jpg
capture-20190428-180736.jpg
capture-20190428-180925.jpg
capture-20190428-181252.jpg

Avatar
Topic author
toutatis
Posts: 483
Joined: 24.02.2018
Age: 50
With us: 1 year 3 months
Location: Almaty, Kazakhstan

Post #1067by toutatis » 28.04.2019, 15:45

Start work with Venus-Expres model from ESA... need to make UV-mapping and texturing this model...
Attachments
capture-20190428-213500.jpg
capture-20190428-213317.jpg
capture-20190428-213021.jpg

Avatar
gironde M
Posts: 362
Joined: 16.12.2016
Age: 66
With us: 2 years 5 months
Location: Montigny-Les-Metz, Grand Est, Lorraine, Moselle, France

Post #1068by gironde » 28.04.2019, 21:51

Great job, Toutatis.

:clap: :clap: :clap:

Avatar
SpaceFanatic64
Posts: 295
Joined: 16.08.2018
Age: 13
With us: 9 months 9 days
Location: Southern California

Post #1069by SpaceFanatic64 » 28.04.2019, 22:29

I have two missions that sound like they would be good for Celestia. The Pioneer Venus Orbiter and Pioneer Venus Multiprobe. After searching through the internet, I was unable to find 3D models of the probes or trajectory data, so you may have to create them on your own.
Follower of the "Celestia Origin" project
Graphics Card: ATI Radeon 3000 Graphics

Avatar
Lafuente_Astronomy
Moderator
Posts: 247
Joined: 04.08.2018
Age: 21
With us: 9 months 21 days
Location: Cebu, Philippines
Contact:

Post #1070by Lafuente_Astronomy » 29.04.2019, 00:35

toutatis wrote:New GAIA model... Autor of the model: ESA (European Space Agency)... Prepared this model for Celestia: toutatis (Alexey Nesterov)...

Art Blos, you might want to add this and update the Gaia Model in Celestia Origin
Official Administrator of the Celestia Discord Server.
Invite: https://discordapp.com/invite/WEWDcJh
If you don't have a Discord account, register here: https://discordapp.com/register
Have a blessed day.

Avatar
Topic author
toutatis
Posts: 483
Joined: 24.02.2018
Age: 50
With us: 1 year 3 months
Location: Almaty, Kazakhstan

Post #1071by toutatis » 29.04.2019, 00:44

Great job, Toutatis.

Thanks Gironde... :smile: :smile: :smile:

Added after 30 minutes 29 seconds:
I have two missions that sound like they would be good for Celestia. The Pioneer Venus Orbiter and Pioneer Venus Multiprobe. After searching through the internet, I was unable to find 3D models of the probes or trajectory data, so you may have to create them on your own.

That's possible, if we have some data (dates of start and finish missions, distances between the goal of mission and the probes in some date of the flight , coordinates, etc...) and also the pictures of the probes...

Avatar
SpaceFanatic64
Posts: 295
Joined: 16.08.2018
Age: 13
With us: 9 months 9 days
Location: Southern California

Post #1072by SpaceFanatic64 » 29.04.2019, 04:39

Searching Pioneer Venus Orbiter or Pioneer Venus Multiprobe on Google images does yield decent results for pictures of the spacecraft itself.
Follower of the "Celestia Origin" project
Graphics Card: ATI Radeon 3000 Graphics

Avatar
Topic author
toutatis
Posts: 483
Joined: 24.02.2018
Age: 50
With us: 1 year 3 months
Location: Almaty, Kazakhstan

Post #1073by toutatis » 01.05.2019, 20:05

Venus-Express model from ESA for Celestia by toutatis...
Attachments
capture-20190502-015915.jpg
capture-20190501-233449.jpg

Avatar
Topic author
toutatis
Posts: 483
Joined: 24.02.2018
Age: 50
With us: 1 year 3 months
Location: Almaty, Kazakhstan

Post #1074by toutatis » 02.05.2019, 10:45

Venus-Express add-on is ready for Celestia...

Added after 2 minutes 39 seconds:
................
Attachments
Venus-Express.7z
(2.65 MiB) Downloaded 8 times
capture-20190502-162816.jpg
capture-20190502-162508.jpg
capture-20190502-162301.jpg
capture-20190502-161908.jpg
capture-20190502-163325.jpg

Avatar
gironde M
Posts: 362
Joined: 16.12.2016
Age: 66
With us: 2 years 5 months
Location: Montigny-Les-Metz, Grand Est, Lorraine, Moselle, France

Post #1075by gironde » 02.05.2019, 12:32

hello Toutatis,

again a good addon ! :smile: :clap: :clap: :clap:

but problem with radius :
first phase (cruise) : Radius 0.0009
second phase (orbiter) : Radius 0.002

Esa write :
"Dimensions: 1.5 x 1.8 x 1.4 m plus two solar arrays (with solar arrays extended, it measures about eight metres across)."

The radius is 0.004

:hi:

Avatar
Topic author
toutatis
Posts: 483
Joined: 24.02.2018
Age: 50
With us: 1 year 3 months
Location: Almaty, Kazakhstan

Post #1076by toutatis » 02.05.2019, 12:38

Thanks Gironde... Sometimes I trying to make add-ons too fast, so such small problems can happen... :smile: ...

Added after 4 minutes 33 seconds:
SSC-file Corrected....

Code: Select all

"Venus Express" "Sol"
{
   Class   "spacecraft"
   Mesh   "Venus-Express.cmod"
   Radius   0.004

   Beginning   "2005 11 09  05:06:00"
   Ending   "2006 04 11  03:00:00"

   SampledTrajectory
   {
      Source   "VEX-Cruise.xyzv"
      DoublePrecision   true
      Interpolation   "cubic"
   }   
   BodyFrame
   {
      TwoVector
      {
         Center   "Sol/Venus Express"
         Primary
         {
            Axis   "z"
            RelativePosition
            {
               Observer   "Sol/Venus Express"
               Target   "Sol"
            }
         }
         Secondary
         {
            Axis   "y"
            RelativeVelocity
            {
               Observer   "Sol/Venus Express"
               Target   "Sol/Earth"
            }
         }
      }
   }
   FixedRotation
   {
      Period   0.00
   }      
}


"Venus Express" "Sol/Venus"
{
   Class   "spacecraft"
   Mesh   "Venus-Express.cmod"
   Radius   0.004

Timeline
[
   {
   Beginning   "2006 04 11  03:00:00"
   Ending   "2006 05 10  00:00:00"

   OrbitFrame
   {
      EclipticJ2000   { Center "Sol/Venus" }
   }
    SampledTrajectory
   {
      Source   "VEX-Orbiter.xyzv"
      DoublePrecision   true
      Interpolation   "cubic"
   }   
   BodyFrame
   {
      TwoVector
      {
         Center   "Sol/Venus/Venus Express"
         Primary
         {
            Axis   "z"
            RelativePosition
            {
               Observer   "Sol/Venus/Venus Express"
               Target   "Sol"
            }
         }
         Secondary
         {
            Axis   "y"
            RelativeVelocity
            {
               Observer   "Sol/Venus/Venus Express"
               Target   "Sol/Venus"
            }
         }
      }
   }
   FixedRotation
    {
      Period   0.00
   }      
}
{
    Ending   "2015 01 18  15:01:55"   

   OrbitFrame
   {
      EclipticJ2000   { Center "Sol/Venus" }
   }   
    EllipticalOrbit
   {
      Epoch   2453865.5  # 2006 May 10 00:00:00
      Period    1.000425438849987
      SemiMajorAxis   39467.884894071611
      Eccentricity   0.8401625310754901
      Inclination     91.17327349487417
      AscendingNode   109.8202787202635
      ArgOfPericenter   101.0868521384817
      MeanAnomaly    336.6702051334237
   }
   BodyFrame
   {
      TwoVector
      {
         Center   "Sol/Venus/Venus Express"
         Primary
         {
            Axis   "z"
            RelativePosition
            {
               Observer   "Sol/Venus/Venus Express"
               Target   "Sol"
            }
         }
         Secondary
         {
            Axis   "y"
            RelativeVelocity
            {
               Observer   "Sol/Venus/Venus Express"
               Target   "Sol/Venus"
            }
         }
      }
    }      
   FixedRotation
    {
       Period    0.00
   }
}
]
}
Last edited by toutatis on 02.05.2019, 13:12, edited 1 time in total.

Avatar
gironde M
Posts: 362
Joined: 16.12.2016
Age: 66
With us: 2 years 5 months
Location: Montigny-Les-Metz, Grand Est, Lorraine, Moselle, France

Post #1077by gironde » 02.05.2019, 12:59

It happens to everyone. And sometimes it is the most obvious that the mind refuses to see.

:smile:

Avatar
Topic author
toutatis
Posts: 483
Joined: 24.02.2018
Age: 50
With us: 1 year 3 months
Location: Almaty, Kazakhstan

Post #1078by toutatis » 02.05.2019, 13:07

It happens to everyone. And sometimes it is the most obvious that the mind refuses to see.

Yes,so... :biggrin:
Attachments
Venus Express (Finale).7z
(2.66 MiB) Downloaded 13 times

Avatar
gironde M
Posts: 362
Joined: 16.12.2016
Age: 66
With us: 2 years 5 months
Location: Montigny-Les-Metz, Grand Est, Lorraine, Moselle, France

Post #1079by gironde » 02.05.2019, 14:32

Toutatis,

About his big brother, Mars-Express

the site (in French), http://www.nirgal.net/mars_express.html provides us with additional information about Mars Express.
The probe is equipped with a radar, MARSIS, capable of probing the Martian soil to a great depth.
This radar works with a triple arm antenna, 2 large arms carrying the span of the probe at 40m (radius 20m) and a smaller and perpendicular arm of 7m.

The MARSIS antenna has been deployed in several phases
May 4, 2005 (1st arm of 20m)
June 14, 2005 (2nd arm of 20m)
June 17, 2005 (3rd arm of 7m)

Can you improve your addon of September 4th, 2018 by separating the period 'cruise' without the antennas ( radius 6m) and a period 'orbiter' with the antennas (radius 20m) ?
This would require 2 models 3D

:wink:

Avatar
Topic author
toutatis
Posts: 483
Joined: 24.02.2018
Age: 50
With us: 1 year 3 months
Location: Almaty, Kazakhstan

Post #1080by toutatis » 02.05.2019, 23:12

Can you improve your addon of September 4th, 2018 by separating the period 'cruise' without the antennas ( radius 6m) and a period 'orbiter' with the antennas (radius 20m) ?
This would require 2 models 3D

Yes Gironde... I can.. no problem... and my next work is Mars Express.. :smile:
I will prepare new model from ESA website... and I can transform any models...


Return to “Add-on releases”

Who is online

Users browsing this forum: 1 guest